Product information:
Corno Piu PFU1, stainless steel
Product number:
1013125
- Built-in sink
- Flush mounted sink
- Sub-structure bowl
Description
Corno Piu PFU1, stainless steel
Aesthetics in detail: the built-in sink from the Corno Piu PFU1 series impresses with its elegant design and meets high functional demands. Its simple and symmetrical rim geometry gives it a clear appearance. With its timeless look, the sink blends in with many kitchen interiors. The stylish appearance is underlined by the flush-fitted strainer basket valve in the sink. Thanks to the first-class stainless steel finish, the kitchen sink offers hard-wearing and durable quality. Its non-porous and easy-care surface is less sensitive to traces of use and particularly easy to clean thanks to the wet-grind finish. Heat- and corrosion-resistant properties are also among the advantages of this high-quality material. The flat, all-round bowl rim allows the single sink to be installed flush with the surface, creating a stepless transition to the worktop.
Built-in/sub-structure sink. Single bowl. 3½" drain and spill-over fitting with basket strainer valve flush with the bottom. When using the mounting brackets supplied, the installation width required increases by approx. 30 mm per side in case of the sub-structure sink.
Flat edge: also suitable for flush installation
— suitable for worktop thicknesses from 10–40 mm (built-in sink) and 20 mm (sub-structure sink)
— cut-out dimensions ca. 210 x 430 mm (built-in sink)
— cut-out dimensions ca. 181 x 401 mm (substructure sink)
Built-in/sub-structure sink. Single bowl. 3½" drain and spill-over fitting with basket strainer valve flush with the bottom. When using the mounting brackets supplied, the installation width required increases by approx. 30 mm per side in case of the sub-structure sink.
Flat edge: also suitable for flush installation
— suitable for worktop thicknesses from 10–40 mm (built-in sink) and 20 mm (sub-structure sink)
— cut-out dimensions ca. 210 x 430 mm (built-in sink)
— cut-out dimensions ca. 181 x 401 mm (substructure sink)
Article type:
Sink
Cabinet width:
300 mm
Colour:
Stainless steel
Cut-out dimension:
approx. 181 x 401 mm (substructure sink), approx. 210 x 430 mm (built-in sink)
Depth:
440 mm
Depth main pool:
400 mm
Excenter fitting:
Drain and spill-over fitting
Flushing radius (R):
10
Height:
297 mm
Height main pool:
171 mm
Installation variant:
Built-in sink, Flush mounted sink, Sub-structure bowl
Main pool width:
180 mm
Material:
stainless steel
Material thickness worktop minimum:
10 mm
Maximum worktop material thickness:
40 mm
Note:
when using the mounting brackets supplied, the installation width required increases by approx. 30 mm per side in case of the sub-structure sink
Number of basins:
1 main sink
Number of overflow points:
1
Overflow:
Overflow in the main basin
Pelvic inner radius (R):
12
Sound insulation:
Yes
Valve type:
3 1⁄2" flush bottom strainer basket valve
Width:
220 mm
Worktop thickness:
The sinks are suitable for worktop thicknesses from 10–40 mm (built-in sink) and from 20 mm (sub-structure sink)
Armature bench:
No
Downloads
Assembly
2D drawings
More
Accessories
Recommendations
1
Variant available
1
Variant available
MAGAZINE
NABER-CONTURA® - Beautiful sinks with convincing functionality!
Our sinks create the highlight in every kitchen. Perfectly designed and functional. To ensure optimal work, every day.
Contact persons and kitchen professionals in your area
The nearest Naber dealer is not far away. On this page you will find competent contact persons and kitchen professionals.
There are three print catalogues: BASICS, TECH and INTERIEUR. They are a popular orientation guide and a rich source of information for browsing and looking around. Let yourself be inspired!