DN 150/160 roof hood, natural red
Product number:
4024024
- Exhaust air accessorie
Description
DN 150/160 roof hood, natural red
The COMPAIR® flow DN 150/160 roof bonnet is specially designed for kitchens in the attic. It helps to reliably transport the exhaust air from the extractor fan to the outside. Since the air transport can take place largely without resistance, the roof ventilator works with extremely low pressure loss. The cross-section of the bonnet head has an advantageous effect, as the diameter of the top tube and bonnet is generally larger than the ventilation pipe to be connected, with the same nominal width. The air outlet is combined with a universal Bleicolor through-pan in the sandwich system, which provides an absolutely secure hold on the roof batten. Thanks to the specially shaped holding plate made of galvanised steel and with Z-edging, an extremely stable roof duct is created. It can be selected in different colour versions. It is suitable for roofs with a pitch of 25 to 45°. The roof bonnet is part of the COMPAIR® flow air duct system. It is characterised by a particularly low-noise and efficient air flow. Suitable connectors and mounting clamps are available as accessories. For safety reasons, the roof installation should be carried out by qualified personnel.
The universal roofing tile is quickly and securely mounted. Due to the Z edge of the bracket plate it immediately achieves a secure grip and may comfortably be moved to the exact installation point on the roof batten. Two rust-free screws (not included) are recommended for secure fastening. With universal lead-coloured pass-through roofing tile for rooves with a tilt angle of 25°–45°. Without backpressure shutter.
The universal roofing tile is quickly and securely mounted. Due to the Z edge of the bracket plate it immediately achieves a secure grip and may comfortably be moved to the exact installation point on the roof batten. Two rust-free screws (not included) are recommended for secure fastening. With universal lead-coloured pass-through roofing tile for rooves with a tilt angle of 25°–45°. Without backpressure shutter.
Article type:
Exhaust air accessorie
Colour:
natural red
Height:
940 mm
Outer diameter:
150 mm
Output drive:
round
System dimension:
150
Downloads
Accessories
Contact persons and kitchen professionals in your area
The nearest Naber dealer is not far away. On this page you will find competent contact persons and kitchen professionals.
There are three print catalogues: BASICS, TECH and INTERIEUR. They are a popular orientation guide and a rich source of information for browsing and looking around. Let yourself be inspired!