COMPAIR STEEL flow® – new material, new possibilities
Promising kitchen ventilation systems!
Non-flammable, extremely robust and 100% compatible with the Naber plastic ducts. The metal duct system COMPAIR STEEL flow® opens up new solutions for extractors with exhaust air and recirculating air.
Naber COMPAIR STEEL flow® vertical pipe bend with guide vanes.
Das in den gewohnten 150er-Abmessungen als Flachkanal und Rundkanal lieferbare System COMPAIR STEEL flow® erfüllt durch umlaufende, in die Systemkomponenten fest integrierte Lippendichtungen höchste Anforderungen an die Dichtigkeit.
Made of galvanised sheet steel, COMPAIR STEEL flow® is particularly hard-wearing. The flat duct with its variably integrated centre bar has a permissible point loading of 100 kilograms. This makes new, very exciting installation options possible. For example, laying in floor structures made of concrete or wet screed. For multi-storey houses, the exhaust duct can be laid, for example, in the floor structure of the storey above. For downdraft systems in cooking islands too, technically and design-optimised exhaust air solutions present themselves, as the duct can be laid invisibly in the floor. Of course, all the conventional routing options are also possible: hidden on the kitchen elements, in the base area and in suspended ceilings, or as an open solution in industrial design.
COMPAIR STEEL flow® air duct elements can also be installed in the floor structure.
Naber COMPAIR STEEL flow® horizontal pipe bend with guide vanes.
COMPAIR STEEL flow® delivers the same perfect flow results as Naber’s proven COMPAIR® flow. Guide elements integrated into the round bends ensure aerodynamically optimal flow and pressure losses that are 80 percent lower than with standard ducts.