Awards:
Product information:
flow Star GTS 150 F wall conduct, white, stainless steel
Product number:
4043041
- Wall sleeve
- installation in the wall
Description
flow Star GTS 150 F wall conduct, white, stainless steel
The COMPAIR® flow Star GTS 150 F wall box provides an effective wall duct for the kitchen exhaust air system and quietly transports the exhaust air to the outside. The integrated guide body technology enables optimum flow behaviour and directs the vapour to the outside with the lowest pressure loss. The large flow cross-section generates high energy, which is efficiently absorbed by an additionally installed compression spring. The exhaust air wall box can be easily opened and closed by means of spring and magnetic force. It is equipped with a 227 x 94 mm connection to a rectangular pipe. The pipe diameter of 150 mm provides for a wall opening of approx. 155 mm. A core hole is recommended for the installation of the mounting pipe. The telescopic pipe allows the length of the feed-through to be adjusted from 314-550 mm depending on the wall thickness. The tube can be shortened to a length of up to 285 mm. The telescopic wall duct has an elegant appearance due to its round outer cover made of high-quality and rustproof stainless steel.
With connection to COMPAIR® flow 150 rectangular tube and round external stainless-steel cover.
— required opening pressure 150 Pa
— stainless steel cover Ø 220 mm
— tube connector 227 x 94 mm, connector depth 80 mm
— installation depth 314–550 mm, can be shortened to 285 mm, wall penetration Ø about 155 mm
— for the installation of the mounting pipe, a core drilling hole (Ø 155 mm) is recommended
With connection to COMPAIR® flow 150 rectangular tube and round external stainless-steel cover.
— required opening pressure 150 Pa
— stainless steel cover Ø 220 mm
— tube connector 227 x 94 mm, connector depth 80 mm
— installation depth 314–550 mm, can be shortened to 285 mm, wall penetration Ø about 155 mm
— for the installation of the mounting pipe, a core drilling hole (Ø 155 mm) is recommended
Article type:
Wall sleeve
Certification:
stainless
Colour:
stainless steel/white
Installation depth:
314–550 mm
Material:
stainless steel
Mounting/Fixing:
installation in the wall
Outer diameter:
150 mm
Output drive:
angular
Properties:
can be shortened
Shortenability:
can be shortened to 285 mm
Support depth:
80 mm
System dimension:
150
Assembly
Measures
More
Contact persons and kitchen professionals in your area
The nearest Naber dealer is not far away. On this page you will find competent contact persons and kitchen professionals.
There are three print catalogues: BASICS, TECH and INTERIEUR. They are a popular orientation guide and a rich source of information for browsing and looking around. Let yourself be inspired!