Stabilising strip, L 567 mm, white
- Connecting materials
The MONTEC® stabilising bar can be used flexibly and can be used to support long and narrow worktops as well as a spacer bar. It can be used upright or flat as required. Practical: thanks to the special design, a wooden panel can also be attached to the front. The moulding is available in different lengths in our shop, depending on requirements.
The stabilising strip for 16 mm sidewalls can be used universally as a spacer bar and in combination to support the worktop. This can be used upright as well as flat, depending on the requirement. Due to the design, a wooden panel can also be fitted in front mounting.
— to support long and narrow worktops
MAGAZINE
Little things make big differences
With the MONTEC® range, Naber supplies all the relevant standard components – from the set for the sink connection to the kitchen connection box, which considerably simplifies the electrical installation of multiple large appliances.
Contact persons and kitchen professionals in your area
The nearest Naber dealer is not far away. On this page you will find competent contact persons and kitchen professionals.
There are three print catalogues: BASICS, TECH and INTERIEUR. They are a popular orientation guide and a rich source of information for browsing and looking around. Let yourself be inspired!