Kickspace KS 800
Product number:
6011019
- Base heating system
- Heating capacity: 1438 - 1788 W
- For room size: 24 m²
Description
Kickspace KS 800
The Kickspace KS 800 baseboard heater spreads cosy warmth in large kitchens and itself takes up minimal space. With its base installation in the base cabinet, the compact heater offers a high degree of planning freedom and does not take up valuable space for additional base cabinets and continuous work surfaces, for example. The unit heats kitchens and other rooms up to 24 m² in size to a comfortable feel-good temperature quickly and energy-efficiently, and is in no way inferior to regular radiators: in view of the powerful convector technology, the compact heater only needs about half the heating time in the smallest space. Thanks to two selectable power levels, the heat output can be regulated as required. And on hotter days, it provides cooling with the help of a cooling air circulation. The heating output of the module depends on the flow temperature and the flow rate of the heating system. For proper operation, the average flow temperature must not be below 60 °C. For a safe and effortless connection to the central heating system and base installation, connection material, an external cover and a room thermostat can also be ordered in the shop.
The compact base-installed heating system for rooms up to about 24 m² can be connected to the central heating system with little effort.
— connected load 230 V/50 Hz
— heating system exclusively for 2-pipe system
— minimum base height 125 mm
Cover plates need to be ordered separately.
PLEASE OBSERVE:
For proper operation, the average feed temperature should not fall below 60 °C.
The heat output of the device depends on the feed temperature and the flow rate of the heating system.
The compact base-installed heating system for rooms up to about 24 m² can be connected to the central heating system with little effort.
— connected load 230 V/50 Hz
— heating system exclusively for 2-pipe system
— minimum base height 125 mm
Cover plates need to be ordered separately.
PLEASE OBSERVE:
For proper operation, the average feed temperature should not fall below 60 °C.
The heat output of the device depends on the feed temperature and the flow rate of the heating system.
Article type:
Base heating system
Colour:
stainless-steel coloured
Connection to central heating system:
Yes
Depth:
309 mm
Engine power:
40 W
For room size:
24 m²
Heating capacity:
1438 - 1788 W
Heating medium:
water
Height:
93 mm
Mains frequency:
50 Hz
Mains voltage:
230 V
Minimum plinth height:
125 mm
Note:
Cover plates need to be ordered separately., For proper operation, the average feed temperature should not fall below 50 °C., The heat output of the device depends on the feed temperature and the flow rate of the heating system.
Plug type:
Angle plug
Standards:
the noise levels were tested according to EN 23741.
Suitable pipe system:
2-pipe
Switch:
Yes
Width:
447 mm
Downloads
Assembly
Accessories
Contact persons and kitchen professionals in your area
The nearest Naber dealer is not far away. On this page you will find competent contact persons and kitchen professionals.
There are three print catalogues: BASICS, TECH and INTERIEUR. They are a popular orientation guide and a rich source of information for browsing and looking around. Let yourself be inspired!