Installation set-3A, set 10-part

Product number: 1050063

Installation set

Prices will only be shown once logged in.

Description

The 10-piece sink connection assembly set 3A is characterised by a tried-and-tested composition. The basis is formed by a 90° swivelling tubular trap and a space-saving connector for installing the trap close to the wall. Added to this are an HTB bend, an HTEM drain pipe, an HTR transition piece, a hose clamp and two torsion-free stainless steel hoses. For electrical installations, a 5 x 2.5 mm² connection cable and a triple table socket are included.

Consisting of:
— 1 x pipe odour trap DN 40 (1051003)
— 1 x space-saving connector (1051017)
— 1 x HTB bend, DN 40/87.5° (1053014)
— 1 x HTEM drain pipe, DN 40, 250 mm long (1053002)
— 1 x HTR transition piece, DN 40/50 (1053031)
— 2 x stainless steel hoses with screw caps (5031028)
— 1 x connecting cable, 5 x 2.5 mm², 2000 mm long (7012004)
— 1 x triple power strip (7011087)
— 1 x hose clip 12 mm (4011044)

When purchasing 20 sets, these may be compiled individually.

Article type:

Installation set

Note:

when purchasing 20 sets, these may be compiled individually

MAGAZINE

Little things make big differences

With the MONTEC^® range, Naber supplies all the relevant standard components – from the set for the sink connection to the kitchen connection box, which considerably simplifies the electrical installation of multiple large appliances.

To the magazine

Contact persons and kitchen professionals in your area

The nearest Naber dealer is not far away. On this page you will find competent contact persons and kitchen professionals.

CATALOGUES & BROCHURES

There are three print catalogues: BASICS, TECH and INTERIEUR. They are a popular orientation guide and a rich source of information for browsing and looking around. Let yourself be inspired!

Catalogue PDFs Online catalogue