Capitello 3, chrome polished, H 183 mm, tube Ø 45 mm
Product number:
3021079
- Console
- slanted
Description
Capitello 3, chrome polished, H 183 mm, tube Ø 45 mm
The Capitello 3 console support creates a highlight in kitchen planning with its angled arrangement. It can be attached to the side wall of base units or the room wall as desired and creates a modern dining area in the kitchen. Its timeless, elegant design consists of a round tube with a thickness of 45 mm and two round mounting plates. One of these serves as a support for a wooden counter top that can be screwed on from below. If a glass counter is to be used, an optionally available glass adapter pane made of stainless steel is required. The table console scores with its high material quality and workmanship. When used in pairs and with even load distribution, it provides a load-bearing capacity of up to 40 kg. There is a choice of different surface finishes, which impress with their insensitive and easy-care properties. The console is intended for vertical mounting on the carcase side wall.
Console.
— slanted
— max. load per pair approx. 40 kg given even distribution, max. spacing of the consoles of 900 mm and max. projection of the plates of 250 mm
When using the glass adapter disk (3021056) bonding should be performed by a glazier.
Console.
— slanted
— max. load per pair approx. 40 kg given even distribution, max. spacing of the consoles of 900 mm and max. projection of the plates of 250 mm
When using the glass adapter disk (3021056) bonding should be performed by a glazier.
Article type:
Console
Carrying capacity:
max. load per pair approx. 40 kg given even distribution, max. spacing of the consoles of 900 mm and max. projection of the plates of 250 mm
Colour:
chrome polished
Diameter bearing surface:
90 mm
Height:
183 mm
Inclination angle:
45°
Inner diameter:
68 mm
Note:
When using the glass adapter disk (3021056) bonding should be performed by a glazier.
Outer diameter:
90 mm
Support element version:
slanted
Surface/coating:
polished
Tube dimension:
Ø 45 mm
Downloads
Assembly
Accessories
1
Variant available
Glass adapter disk, stainless-steel, Ø 90 mm
Product number:
3021056
- Accessory
- Material: stainless steel
Contact persons and kitchen professionals in your area
The nearest Naber dealer is not far away. On this page you will find competent contact persons and kitchen professionals.
There are three print catalogues: BASICS, TECH and INTERIEUR. They are a popular orientation guide and a rich source of information for browsing and looking around. Let yourself be inspired!