COMPAIR® flow – the original for almost every application
Promising kitchen ventilation systems!
The sophisticated air duct system, with its optimised flow characteristics and efficient cross-sections, ensures high air flow rates, low operating noise and reduced flow resistance.
The more streamlined the air duct is, the more powerful and quiet the operation.
Moving air has its own laws. The higher the volume and the higher the flow velocity, the more important optimum the geometry of the air duct is. Very large volumes of air (up to 650 cubic metres per hour with powerful hoods) should make their way to the outside with as little hindrance as possible.
Long ducts, the wrong material, unfavourable geometries, reduction of the cross section or sharp bends lead to stalls and pressure losses. With the result that the vapour is not extracted as effectively and the cleaning performance decreases. Noise and power consumption, on the other hand, increase.
Naber COMPAIR® flow air duct bend with guide vanes guarantees minimum flow loss.
Guide vanes ensure optimum airflow.
In the patented COMPAIR® flow air duct systems, air flows smoothly and quietly around the bends. This is ensured by the precisely calculated radii of the curved sections, a balanced height-to-width ratio in the flat ducts, and integrated air deflectors in transition pieces and horizontal bends.
COMPAIR® flow is available as a round or flat duct with a diameter of 125mm and 150mm. 78 to 90 percent less pressure loss compared to conventional bends and deflectors speak a clear language. This means that long routes can also be bridged, whereby the shortest possible air duct is always best. The result: good extraction of vapour, also at low, and thus quieter ventilator levels.
By viewing the video you agree that your data will be transferred to YouTube and that you have read the Privacy policy.