Go to homepage
Skip image gallery

Product information:

Corno Piu PFU5, stainless steel

Product number: 1013126
  • Built-in sink
  • Flush mounted sink
  • Sub-structure bowl
Variant type

Prices will only be shown once logged in.

Description
Corno Piu PFU5, stainless steel
Whether as an island solution or in the kitchen unit, the elegant Corno Piu PFU5 fitted/undermount sink blends into any interior design. This is made possible by its purist design with narrow, linear edges and small corner radii. The overflow is also discreetly integrated into the upper frame. The single bowl sink is made of wet-ground stainless steel. The special process creates a fine structure that makes it easier for the water to run off. The surface is also less susceptible to scratches and particularly easy to clean. The extra-flat rim of the sink surface allows for individual installation variants. The sink can either be set into the cut-out in the worktop from above or be recessed flush with the surface at the same level. In addition, a recessed undercounter solution is also possible, which shows the layered structure of the worktop. A flush-floor strainer basket valve and a drain and overflow fitting complete the equipment.



Built-in/sub-structure sink. Single bowl. 3½" drain and spill-over fitting with basket strainer valve flush with the bottom. When using the mounting brackets supplied, the installation width required increases by approx. 30 mm per side in case of the sub-structure sink.
Flat edge: also suitable for flush installation
— suitable for worktop thicknesses from 10–40 mm (built-in sink) and 20 mm (sub-structure sink)
— cut-out dimensions ca. 480 x 430 mm (built-in sink)
— cut-out dimensions ca. 450 x 400 mm (substructure sink)





Article type:
Sink
Cabinet width:
600 mm
Colour:
Stainless steel
Cut-out dimension:
approx. 450 x 400 mm (substructure sink), approx. 480 x 430 mm (built-in sink)
Excenter fitting:
Drain and spill-over fitting
Flushing radius (R):
10
Installation variant:
Built-in sink, Flush mounted sink, Sub-structure bowl
Material thickness worktop minimum:
10 mm
Maximum worktop material thickness:
40 mm
Note:
when using the mounting brackets supplied, the installation width required increases by approx. 30 mm per side in case of the sub-structure sink
Number of overflow points:
1
Number of sinks:
1 main sink
Overflow:
Overflow in the main basin
Pelvic inner radius (R):
12
Sound insulation:
Yes
Valve type:
3 1⁄2" flush bottom strainer basket valve
Variant type:
Sink without tap
Worktop thickness:
The sinks are suitable for worktop thicknesses from 10–40 mm (built-in sink) and from 20 mm (sub-structure sink)
Material:
stainless steel
Depth:
440 mm
Height:
327 mm
Width:
490 mm
Armature bench:
No
Depth main sink:
400 mm
Height main sink:
201 mm
Main sink width:
450 mm

Downloads

Assembly Assembly
Data sheet Data sheet
2D drawings 2D drawings
Skip product gallery

Accessories

Drip tray small, stainless steel
Drip tray small, stainless steel
Product number: 1013043
  • Accessory
  • Width: 196 mm
  • Depth: 431 mm
Details
Rotational knob excenter fitting, for Corno Piu PFU 2–11
Rotational knob excenter fitting, for Corno Piu PFU 2–11
Product number: 1014046
  • Accessory
  • Material: stainless steel
  • Colour: Stainless steel
Details
Filo dish drainer, stainless steel
Filo dish drainer, stainless steel
Product number: 1013041
  • Accessory
  • Width: 325 mm
  • Depth: 450 mm
Details
Cutting board made of plastic, white
Cutting board made of plastic, white
Product number: 1013045
  • plastic
  • white
Details
Drip tray large, stainless steel
Drip tray large, stainless steel
Product number: 1013044
  • Accessory
  • Width: 366 mm
  • Depth: 431 mm
Details
Skip product gallery

Spare parts

5 variations available
Drain and spillover valve, 3½", for Corno Piu PFU 1–5
Product number: 1010048
  • Accessory
Details
Skip product gallery

Recommendations

1 Variant available
Stainless steel cleaning agent Utral, 250 ml
Stainless steel cleaning agent Utral, 250 ml
Product number: 1111142
  • Cleaning agent
  • 0,25 l
Details

MAGAZINE

NABER-CONTURA® - Beautiful sinks with convincing functionality!

Our sinks create the highlight in every kitchen. Perfectly designed and functional. To ensure optimal work, every day.



 

To the magazine

Contact persons and kitchen professionals in your area

The nearest Naber dealer is not far away. On this page you will find competent contact persons and kitchen professionals.

CATALOGUES & BROCHURES

There are three print catalogues: BASICS, TECH and INTERIEUR. They are a popular orientation guide and a rich source of information for browsing and looking around. Let yourself be inspired!



Catalogue PDFs Online catalogue

This website uses cookies to ensure the best experience possible. More information...