Product information:
Corno Piu PFU2, stainless steel
Product number:
1013124
- Built-in sink
- Flush mounted sink
- Sub-structure bowl
Description
Corno Piu PFU2, stainless steel
Straight contours and a symmetrical rim geometry characterise the appearance of the Corno Piu PFU2 stainless steel fitted sink. With its narrow, flat rims, it opens up numerous possibilities for functional and at the same time modern kitchen planning. To meet the daily demands in the kitchen, the single sink is made of high-quality stainless steel. A high degree of resistance is achieved by finishing the surface with a wet grinding process. This makes it resistant to corrosion and heat, while at the same time allowing water to drain away much better. The basic equipment includes an overflow and a drain set with a flush-floor strainer basket valve. Optionally, a set including the optically matching Mio 3 fitting is available, which is attached directly to the worktop. The sink is suitable for flush installation from above and for installation as an undermount sink. Optionally, it can be equipped with a stainless steel push-button eccentric fitting for more convenient handling. Accessories available in the Naber Shop, such as draining grids and trays, further expand the possible uses of the single bowl.
Built-in/sub-structure sink. Single bowl. 3½" drain and spill-over fitting with basket strainer valve flush with the bottom. When using the mounting brackets supplied, the installation width required increases by approx. 30 mm per side in case of the sub-structure sink.
Flat edge: also suitable for flush installation
— suitable for worktop thicknesses from 10–40 mm (built-in sink) and 20 mm (sub-structure sink)
— cut-out dimensions ca. 370 x 430 mm (built-in sink)
— cut-out dimensions ca. 341 x 401 mm (substructure sink)
Built-in/sub-structure sink. Single bowl. 3½" drain and spill-over fitting with basket strainer valve flush with the bottom. When using the mounting brackets supplied, the installation width required increases by approx. 30 mm per side in case of the sub-structure sink.
Flat edge: also suitable for flush installation
— suitable for worktop thicknesses from 10–40 mm (built-in sink) and 20 mm (sub-structure sink)
— cut-out dimensions ca. 370 x 430 mm (built-in sink)
— cut-out dimensions ca. 341 x 401 mm (substructure sink)
Article type:
Sink
Cabinet width:
450 mm
Colour:
Stainless steel
Cut-out dimension:
approx. 341 x 401 mm (substructure sink), approx. 370 x 430 mm (built-in sink)
Depth:
440 mm
Depth main pool:
400 mm
Excenter fitting:
Drain and spill-over fitting
Flushing radius (R):
10
Height:
327 mm
Height main pool:
201 mm
Installation variant:
Built-in sink, Flush mounted sink, Sub-structure bowl
Main pool width:
340 mm
Material:
stainless steel
Material thickness worktop minimum:
10 mm
Maximum worktop material thickness:
40 mm
Note:
when using the mounting brackets supplied, the installation width required increases by approx. 30 mm per side in case of the sub-structure sink
Number of basins:
1 main sink
Number of overflow points:
1
Overflow:
Overflow in the main basin
Pelvic inner radius (R):
12
Sound insulation:
Yes
Valve type:
3 1⁄2" flush bottom strainer basket valve
Width:
380 mm
Worktop thickness:
The sinks are suitable for worktop thicknesses from 10–40 mm (built-in sink) and from 20 mm (sub-structure sink)
Armature bench:
No
Downloads
Assembly
2D drawings
Accessories
Rotational knob excenter fitting, stainless steel, drill Ø 35 mm
Product number:
1014046
- Accessory
- Material: stainless steel
- Colour: Stainless steel
3
variations available
Rotational knob excenter fitting, stainless steel, for Corno Ora
Product number:
1014044
- Accessory
- Drilling diameter: 35 mm
- Colour: Stainless steel
Recommendations
1
Variant available
4
variations available
LINEA Mio 3, chrome, high-pressure
Product number:
5011308
- Sink faucet
- Single lever faucet
- Swivelling
1
Variant available
MAGAZINE
NABER-CONTURA® - Beautiful sinks with convincing functionality!
Our sinks create the highlight in every kitchen. Perfectly designed and functional. To ensure optimal work, every day.
Contact persons and kitchen professionals in your area
The nearest Naber dealer is not far away. On this page you will find competent contact persons and kitchen professionals.
There are three print catalogues: BASICS, TECH and INTERIEUR. They are a popular orientation guide and a rich source of information for browsing and looking around. Let yourself be inspired!