Loading...
Description
Corno Basso 4, stainless steel

Visually, the Corno Basso 4 stainless steel inset/undercounter sink with its minimalist design concept fits in perfectly with modern kitchen planning. The most striking feature is the symmetrical geometry of the bowl, which is emphasised by small corner radii and flat edges. The flush integration of the drain and overflow fitting, which is part of the basic equipment, blends harmoniously into the overall picture. High-quality stainless steel is used in the production process. The noble sheen and the special resistance of the surfaces are the result of a special wet-grinding process, which also enables improved drainage of the rinsing water. The sink is available individually or as a set including the chrome-plated Arco 1 high-pressure fitting. Depending on personal preferences, the single sink can also be installed flush from above. Thanks to its design, it is also suitable for installation as an undermount sink, so that it forms a unit with the worktop. Stainless steel push-button eccentric and pull-button eccentric sets are available for easier operation of the sink.





Built-in/sub-structure sink. Single bowl. 3½" drain and spill-over fitting. When using the mounting brackets supplied, the installation width required increases by approx. 30 mm per side in case of the sub-structure sink.
Flat edge: also suitable for flush installation
— cut-out dimensions ca. 530 x 430 mm (built-in sink)
— cut-out dimensions ca. 500 x 400 mm (substructure sink)



Article type:
Sink
Cabinet width:
600 mm
Colour:
Stainless steel
Cut-out dimension:
approx. 500 x 400 mm (substructure sink), approx. 530 x 430 mm (built-in sink)
Depth:
440 mm
Depth main pool:
400 mm
Excenter fitting:
Drain and spill-over fitting
Flushing radius (R):
10
Height:
286 mm
Height main pool:
181 mm
Installation variant:
Built-in sink, Flush mounted sink, Sub-structure bowl
Main pool width:
500 mm
Material:
stainless steel
Material thickness worktop minimum:
10 mm
Maximum worktop material thickness:
40 mm
Note:
when using the mounting brackets supplied, the installation width required increases by approx. 30 mm per side in case of the sub-structure sink
Number of basins:
1 main sink
Number of overflow points:
1
Overflow:
Overflow in the main basin
Pelvic inner radius (R):
12
Sound insulation:
Yes
Valve type:
3½" basket strainer valve flush
Width:
540 mm
Worktop thickness:
The sinks are suitable for worktop thicknesses from 10–40 mm (built-in sink) and from 20 mm (sub-structure sink)
Armature bench:
No

Accessories

Cutting board made of plastic, white
Product number: 1013045
  • plastic
  • white
Drip tray large, stainless steel
Product number: 1013044
  • Accessory
  • Width: 366 mm
  • Depth: 433 mm
Rotational knob excenter fitting, stainless steel, drill Ø 35 mm
Product number: 1014047
  • Accessory
  • Material: stainless steel
  • Colour: Stainless steel
Pull eccentric fitting, knob stainless steel
Product number: 1013059
  • Accessory
  • stainless steel
Drip tray small, stainless steel
Product number: 1013043
  • Accessory
  • Width: 196 mm
  • Depth: 433 mm
Filo dish drainer, stainless steel
Product number: 1013041
  • Accessory
  • Width: 325 mm
  • Depth: 450 mm

Spare parts

5 variations available
3 variations available
Rotational knob excenter fitting, stainless steel, for Corno Turno 50/60
Product number: 1013057
  • Drain fittings
  • Drilling diameter: 35 mm
  • Material: stainless steel

Recommendations

Stainless steel system care
Product number: 1111141
  • Cleaning agent
  • 0,5 l
11 variations available
LINEA Arco 1, chrome, high pressure
Product number: 5011250
  • Sink faucet
  • Single lever faucet
  • Swivelling
1 Variant available
Stainless steel care agent Edelglanz, 250 ml
Product number: 1111143
  • Cleaning agent
  • 0,25 l
1 Variant available
Stainless steel cleaning agent Utral, 250 ml
Product number: 1111142
  • Cleaning agent
  • 0,25 l

MAGAZINE

NABER-CONTURA® - Beautiful sinks with convincing functionality!

Our sinks create the highlight in every kitchen. Perfectly designed and functional. To ensure optimal work, every day.



 

To the magazine

Contact persons and kitchen professionals in your area

The nearest Naber dealer is not far away. On this page you will find competent contact persons and kitchen professionals.

CATALOGUES & BROCHURES

There are three print catalogues: BASICS, TECH and INTERIEUR. They are a popular orientation guide and a rich source of information for browsing and looking around. Let yourself be inspired!



Catalogue PDFs Online catalogue