Angola 150, granite metallico
Product number:
1106013
- Built-in sink
- Composite
- Eccentric set, chrome-plated
Description
Angola 150, granite metallico
The Angola 150 composite fitted sink in a refined granite look combines contemporary design with a high level of functionality. With its neutral yet distinctive look and clearly defined contours, it blends harmoniously into the kitchen counter. The generous draining surface with ribbing proves to be particularly advantageous when working in the kitchen. The large main basin with strainer basket valve and chrome-plated rotary eccentric fitting is complemented by a waste basin. It is also equipped with a strainer basket valve and the corresponding eccentric fitting. This can be used to pour off leftover drinks and other liquids that do not belong in the rinse water. Long-lasting cast stone is used in the production of the sink. The material, which is inspired by nature, is characterised by an outstanding surface resistance. It is therefore scratch and stain resistant and extremely easy to clean. The built-in sink can be fitted with a hot water set up to 100 °C without hesitation. Alternatively, high-pressure fittings in a matching look are available for the individual granite colour variants.
Built-in sink. Composite, with draining surface and half sink, reversible. 3½" basket strainer valve flush with rotational excenter fitting, chrome-plated. Half sink closeable.
— both sides drilled through
— suitable for worktop thicknesses from 22 mm to 44 mm
— cut-out dimensions ca. 980 x 480 mm
— without half sink insert
— can also be used in combination with hot water fittings (+/–100 °C)
Built-in sink. Composite, with draining surface and half sink, reversible. 3½" basket strainer valve flush with rotational excenter fitting, chrome-plated. Half sink closeable.
— both sides drilled through
— suitable for worktop thicknesses from 22 mm to 44 mm
— cut-out dimensions ca. 980 x 480 mm
— without half sink insert
— can also be used in combination with hot water fittings (+/–100 °C)
Article type:
Sink
Arrangement basin:
Reversible
Cabinet width:
600 mm
Colour:
granite metallico
Cut-out dimension:
approx. 980 x 480 mm
Deep residual basin:
340 mm
Depth:
500 mm
Depth main pool:
430 mm
Draining board:
With ribbed draining surface
Excenter fitting:
Eccentric set, chrome-plated
Garnish actuation:
Chrome-plated rotary eccentric
Height leftover basin:
146 mm
Installation variant:
Built-in sink
Main pool width:
345 mm
Material:
Composite
Material thickness worktop minimum:
22 mm
Maximum worktop material thickness:
44 mm
Number of basins:
1 main sink and 1 half sink
Number of holes:
2
Number of overflow points:
1
Number of tap holes:
1
Overflow:
Overflow in the main basin
Suitable for:
can also be used in combination with hot water fittings (+/–100 °C)
Valve type:
3½" basket strainer valve flush
Wide leftover basin:
155 mm
Width:
1.000 mm
Armature bench:
Yes
Downloads
MAGAZINE
NABER-CONTURA® - Beautiful sinks with convincing functionality!
Our sinks create the highlight in every kitchen. Perfectly designed and functional. To ensure optimal work, every day.
Contact persons and kitchen professionals in your area
The nearest Naber dealer is not far away. On this page you will find competent contact persons and kitchen professionals.
There are three print catalogues: BASICS, TECH and INTERIEUR. They are a popular orientation guide and a rich source of information for browsing and looking around. Let yourself be inspired!