Kreta 1 slanted, stainless steel coloured, H 170 mm
Product number:
3023028
- Console
- Material: aluminium
- angular
Description
Kreta 1 slanted, stainless steel coloured, H 170 mm
With its angular, angular design, the Kreta 1 console support creates an eye-catcher in the kitchen. The support element is used to build a raised counter on the worktop and creates a modern dining space for high chairs. It is compatible for wood mounting and UV glass bonding. For this purpose, the 60° inclined console has a square mounting plate for screwing into the wood. For a glass counter, a glass adapter pane from the accessories is also required. The counter base consists of a stable aluminium profile with an edge thickness of 50 x 50 mm. It has a ground surface with different colour finishes. Its load-bearing capacity is approx. 60 kg when used in pairs and with an evenly distributed load. The support is available in various standard heights for individual countertop design. The support is screwed onto the worktop.
Console.
— slanted
— aluminium profile 50 x 50 mm, milled
— slant angle 60°
— max. load per pair approx. 60 kg given even distribution, max. spacing of the consoles of 900 mm and max. projection of the plates of 250 mm
May be used for fastening to wood and with adaptor for gluing to UV glass.
When using the glass adapter disk (3023007) bonding should be performed by a glazier.
Console.
— slanted
— aluminium profile 50 x 50 mm, milled
— slant angle 60°
— max. load per pair approx. 60 kg given even distribution, max. spacing of the consoles of 900 mm and max. projection of the plates of 250 mm
May be used for fastening to wood and with adaptor for gluing to UV glass.
When using the glass adapter disk (3023007) bonding should be performed by a glazier.
Article type:
Console
Carrying capacity:
max. load per pair approx. 60 kg given even distribution, max. spacing of the consoles of 900 mm and max. projection of the plates of 250 mm
Colour:
stainless-steel coloured
Dimensions profile:
50 x 50 mm
Dimensions support surface:
90 x 90 mm
Form:
angular
Height:
170 mm
Inclination angle:
60°
Length:
50 mm
Material:
aluminium
Material profile:
aluminium
Note:
When using the glass adapter disk (3023007) bonding should be performed by a glazier.
Suitable for:
fastening to wood and with adaptor for gluing to UV glass
Support element version:
slanted
Surface/coating:
milled
Width:
50 mm
Accessories
Contact persons and kitchen professionals in your area
The nearest Naber dealer is not far away. On this page you will find competent contact persons and kitchen professionals.
There are three print catalogues: BASICS, TECH and INTERIEUR. They are a popular orientation guide and a rich source of information for browsing and looking around. Let yourself be inspired!