Loading...
Description
Kitchen connection box, 4.8 m/1.8 m (supply line) cable length, white
The ready-to-install kitchen junction box has all the connection cables to connect electrical appliances such as a hob or induction hob, an oven and a dishwasher. The junction box, which measures 45 x 95 x 95 mm (H x W x L), is screwed and sealed to prevent unauthorised opening. This is an important aspect, as connection and commissioning may only be carried out by qualified electricians. For a general understanding of the construction, a printed label shows the internal wiring. The input voltage of the power distributor is 400 V, the maximum back-up fuse is limited to 16 A. Starting from the cooker socket, attention must be paid to the total connected load in KW so that this is not exceeded by the hob and oven power. A dishwasher or washing machine is connected via the dish coupling. The use of a multiple table socket is not recommended for safety reasons. The Power Splitter is not suitable for installation in damp rooms with an assignment to protection class IP20.



The practical electrical kitchen connection is already equipped with all the necessary connecting cables for hob, oven, dishwasher or induction fields. The kitchen electric appliances can simply be connected from the cooker socket and the electrical connection implemented in an easy and space-saving manner.

Technical specifications:
— input voltage 400 V
— preliminary fuse max. 16 A
— cable and socket tested according to IEC 60670-1 (DIN EN 60670-1), IEC 60670-22 (DIN EN 60670-22) and IEC 61535 (DIN EN 61535)
— construction: The socket housing is screwed and sealed against unauthorised opening. This prevents any interference in the wiring. The internal wiring is printed on a label.
— grey distribution box 45 x 95 x 95 mm (H x W x L)

Calculation of the connection value of the kitchen connection box:
total connected value cooker socket 11 KW (given symmetrical distribution)
hob power (4-pole connection) max. 7360 W (2-phase)
oven power (3-pole connection) max. 3680 W (1-phase)

The device corresponds to protection class IP20 and is not suitable for use in wet rooms. Connection and commissioning may only be carried out by a qualified electrician.

For safety reasons, a power strip should not be used to connect several electricity consumers via the box coupling.





Article type:
Distributor
Colour:
white
Height:
45 mm
Length:
95 mm
Length of the supply line (primary):
4.800 mm
Length secondary line/switch line:
1.800 mm
Width:
95 mm

Downloads

MAGAZINE

Little things make big differences

With the MONTEC® range, Naber supplies all the relevant standard components – from the set for the sink connection to the kitchen connection box, which considerably simplifies the electrical installation of multiple large appliances.



 

To the magazine

Contact persons and kitchen professionals in your area

The nearest Naber dealer is not far away. On this page you will find competent contact persons and kitchen professionals.

CATALOGUES & BROCHURES

There are three print catalogues: BASICS, TECH and INTERIEUR. They are a popular orientation guide and a rich source of information for browsing and looking around. Let yourself be inspired!



Catalogue PDFs Online catalogue