Loading...
Description
Kickspace KS 500, W 322 mm

The Kickspace KS 500 plinth heater is a creative and, above all, space-saving heating solution for the kitchen or other rooms. Unlike a conventional radiator, it takes up no space in the room and is instead simply fitted into the plinth space of the base unit. It is in no way inferior to a radiator in terms of heating output and can also be connected to the building’s central heating system. The KS 500 is suitable for quickly and effectively heating rooms up to 12 m² in size. The Kickspace compact heater features two individually selectable power settings in heating mode and a cooling air circulation function for the summer. Thanks to its powerful convector technology packed into a very compact space, the skirting board heater takes only about half the time to heat a room compared to standard heaters. Furthermore, thanks to its whisper-quiet fan technology, it operates almost imperceptibly. The unit’s heating output depends on the flow temperature and flow rate of the heating system; for proper operation, the average flow temperature must not fall below 60 °C. Installing Kickspace is quick and straightforward: in just a few simple steps, the heating module can be securely fitted into the skirting board space and connected to the central heating system. The stainless steel-coloured external cover is also available from the Naber Shop. A room thermostat for easy regulation of the room temperature is also available, alongside the necessary connection materials.





The compact base-installed heating system for rooms up to about 12 m² can be connected to the central heating system with little effort. 
— connected load 230 V/50 Hz
— heating system exclusively for 2-pipe system
— minimum base height 125 mm

Please note! Ventilation grids and connection hoses are not included in the scope of delivery. Please order additionally.

PLEASE OBSERVE:
For proper operation, the average feed temperature should not fall below 60 °C.

The heat output of the device depends on the feed temperature and the flow rate of the heating system.





Article type:
Base heating system
Colour:
stainless-steel coloured
Connection to central heating system:
Yes
Engine power:
25 W
For room size:
12 m²
Heating capacity:
740 - 976 W
Heating medium:
water
Mains frequency:
50 Hz
Mains voltage:
230 V
Minimum plinth height:
125 mm
Note:
Cover plates need to be ordered separately., For proper operation, the average feed temperature should not fall below 60 °C., The heat output of the device depends on the feed temperature and the flow rate of the heating system.
Plug type:
Angle plug
Standards:
the noise levels were tested according to EN 23741.
Suitable pipe system:
2-pipe
Switch:
Yes
Depth:
309 mm
Height:
93 mm
Width:
322 mm
Skip product gallery

Accessories

3 variations available
Reinforced hose, L 1000 mm
Reinforced hose, L 1000 mm
Product number: 6011015
  • Hose
  • With ½" external thread and union nut.
  • Material: stainless steel
3 variations available
Reinforced hose, L 700 mm
Reinforced hose, L 700 mm
Product number: 6011010
  • Hose
  • With ½" external thread and union nut.
  • Material: stainless steel
3 variations available
Reinforced hose, L 1500 mm
Reinforced hose, L 1500 mm
Product number: 6011016
  • Hose
  • With ½" external thread and union nut.
  • Material: stainless steel
2 variations available
Kickspace-cover, KS 500, W 496 mm, stainless steel coloured
Room thermostat 230 V, white
Room thermostat 230 V, white
Product number: 6011011
  • Accessory

Contact persons and kitchen professionals in your area

The nearest Naber dealer is not far away. On this page you will find competent contact persons and kitchen professionals.

CATALOGUES & BROCHURES

There are three print catalogues: BASICS, TECH and INTERIEUR. They are a popular orientation guide and a rich source of information for browsing and looking around. Let yourself be inspired!



Catalogue PDFs Online catalogue