Installation set-8A, set 7-part
The 7-piece sink connection assembly set 8A includes all assembly parts for connecting the siphon. The 90° swivelling outlet pipe in combination with the space-saving connector for routing the disposal pipe close to the wall proves to be practical. In addition, there is a standardised HTB bend made of polypropylene and a HTEM drain pipe. The set also includes two stainless steel hoses suitable for drinking water, which enable torsion-free installation thanks to rotatable union nuts. The sink connection accessories are completed by a 5 x 2.5 mm² connection cable for electrical appliances such as a hob and an oven.

Consisting of:
— 1 x pipe odour trap DN 50 (1051004)
— 1 x space-saving connector (1051017)
— 1 x HTB bend, DN 50/87.5° (1053020)
— 1 x HTEM drain pipe, DN 50, 250 mm long (1053006)
— 2 x stainless steel hoses with screw caps (5031028)
— 1 x connecting cable, 5 x 2.5 mm², 2000 mm long (7012004)

When purchasing 20 sets, these may be compiled individually.

Article type:
Installation set
when purchasing 20 sets, these may be compiled individually


Little things make big differences

With the MONTEC® range, Naber supplies all the relevant standard components – from the set for the sink connection to the kitchen connection box, which considerably simplifies the electrical installation of multiple large appliances.


To the magazine

Contact persons and kitchen professionals in your area

The nearest Naber dealer is not far away. On this page you will find competent contact persons and kitchen professionals.


There are three print catalogues: BASICS, TECH and INTERIEUR. They are a popular orientation guide and a rich source of information for browsing and looking around. Let yourself be inspired!

Catalogue PDFs Online catalogue