Installation set-5A, set 7-part
The 7-piece sink connection assembly set 5A includes all the necessary elements for an installation under the sink cabinet. The basic parts include a tubular trap with an outlet pipe that can be swivelled by 90° for variable guidance and a space-saving connector. It allows the siphon to be repositioned close to the wall. The set is completed by an 87.5° HTB bend, an HTEM outlet pipe with a length of 250 mm and a DN 40/50 transition piece. The two stainless steel hoses included as sink connection accessories are equipped with swivel union nuts for torsion-free integration.

Consisting of:
— 1 x pipe odour trap DN 40 (1051003)
— 1 x space-saving connector (1051017)
— 1 x HTB bend, DN 40/87.5° (1053014)
— 1 x HTEM drain pipe, DN 40, 250 mm long (1053002)
— 1 x HTR transition piece, DN 40/50 (1053031)
— 2 x stainless steel hoses with screw caps (5031028)

When purchasing 20 sets, these may be compiled individually.

Article type:
Installation set
when purchasing 20 sets, these may be compiled individually


Little things make big differences

With the MONTEC® range, Naber supplies all the relevant standard components – from the set for the sink connection to the kitchen connection box, which considerably simplifies the electrical installation of multiple large appliances.


To the magazine

Contact persons and kitchen professionals in your area

The nearest Naber dealer is not far away. On this page you will find competent contact persons and kitchen professionals.


There are three print catalogues: BASICS, TECH and INTERIEUR. They are a popular orientation guide and a rich source of information for browsing and looking around. Let yourself be inspired!

Catalogue PDFs Online catalogue