Installation set-3, set 10-part
The 10-piece sink connection assembly set-3 enables the uncomplicated connection of a double sink to the drain. The drain hose of a dishwasher can also be connected and fixed with the hose clamp. A ball siphon forms the basis of the system. This is completed by a space-saving connector for the second basin, bend, drain pipe and transition piece. Furthermore, the sink fitting can be connected to the water inlet with the two stainless steel hoses included in the set. If an under-sink unit is used, the 200 cm long, 5-core power connection cable can be used. A triple socket shares the existing power connection for the dishwasher.

Consisting of:
— 1 x ball siphon DN 40 (1051011)
— 1 x space-saving connector (1051017)
— 1 x HTB bend, DN 40/87.5° (1053014)
— 1 x HTEM drain pipe, DN 40, 250 mm long (1053002)
— 1 x HTR transition piece, DN 40/50 (1053031)
— 2 x stainless steel hoses with screw caps (5031028)
— 1 x connecting cable, 5 x 2.5 mm², 2000 mm long (7012004)
— 1 x triple power strip (7011087)
— 1 x hose clip 12 mm (4011044)

When purchasing 20 sets, these may be compiled individually.

Article type:
Installation set
when purchasing 20 sets, these may be compiled individually


Little things make big differences

With the MONTEC® range, Naber supplies all the relevant standard components – from the set for the sink connection to the kitchen connection box, which considerably simplifies the electrical installation of multiple large appliances.


To the magazine

Contact persons and kitchen professionals in your area

The nearest Naber dealer is not far away. On this page you will find competent contact persons and kitchen professionals.


There are three print catalogues: BASICS, TECH and INTERIEUR. They are a popular orientation guide and a rich source of information for browsing and looking around. Let yourself be inspired!

Catalogue PDFs Online catalogue