Loading...
Description
Installation set-1A, set 8-part
The 8-piece sink connection installation set 1A scores with its extensive features. It includes a 90° swivelling tubular odour trap and a space-saving connector for installation close to the wall. In addition, there is an 87.5° HTB bend, an HTEM drain pipe and an HTR transition piece. All three installation elements are characterised by their heat-resistant properties. The two stainless-steel hoses are torsion-free thanks to rotatable union nuts and facilitate installation. The sink connection accessory set is completed by a 5 x 2.5 mm² connection cable for the hob or an oven.



Consisting of:
— 1 x pipe odour trap DN 40 (1051003)
— 1 x space-saving connector (1051017)
— 1 x HTB bend, DN 40/87.5° (1053014)
— 1 x HTEM drain pipe, DN 40, 250 mm long (1053002)
— 1 x HTR transition piece, DN 40/50 (1053031)
— 2 x stainless steel hoses with screw caps (5031028)
— 1 x connecting cable, 5 x 2.5 mm², 2000 mm long (7012004)

When purchasing 20 sets, these may be compiled individually.





Article type:
Installation set
Note:
when purchasing 20 sets, these may be compiled individually

MAGAZINE

Little things make big differences

With the MONTEC® range, Naber supplies all the relevant standard components – from the set for the sink connection to the kitchen connection box, which considerably simplifies the electrical installation of multiple large appliances.



 

To the magazine

Contact persons and kitchen professionals in your area

The nearest Naber dealer is not far away. On this page you will find competent contact persons and kitchen professionals.

CATALOGUES & BROCHURES

There are three print catalogues: BASICS, TECH and INTERIEUR. They are a popular orientation guide and a rich source of information for browsing and looking around. Let yourself be inspired!



Catalogue PDFs Online catalogue