HTB-S bend continuously variable, angle 0–87°, Ø 50 mm
Product number:
1053028
- Drain pipe
Description
HTB-S bend continuously variable, angle 0–87°, Ø 50 mm
This HTB-S bend is continuously adjustable in an angle of 0 - 87°. Based on this, it enables flexible deflection within the waste water installation. The bend has a diameter of 50 mm. Lubricant is recommended as an accessory for the connection to pipes on both sides.
Always the right angle, with just one bend, continuously variable from 0–87°.
Always the right angle, with just one bend, continuously variable from 0–87°.
Article type:
Drain pipe
Adjustment:
continuously variable from 0–87°
Colour:
grey
Diameter/nominal width (DN):
Ø 50 mm
Elbow hose fitting:
0-87°
Accessories
MAGAZINE
Little things make big differences
With the MONTEC® range, Naber supplies all the relevant standard components – from the set for the sink connection to the kitchen connection box, which considerably simplifies the electrical installation of multiple large appliances.
Contact persons and kitchen professionals in your area
The nearest Naber dealer is not far away. On this page you will find competent contact persons and kitchen professionals.
There are three print catalogues: BASICS, TECH and INTERIEUR. They are a popular orientation guide and a rich source of information for browsing and looking around. Let yourself be inspired!