Awards:
More:
Flex-Frame®, for cabinet widths 500/600 mm
Product number:
5031037
- Mounting frames
- Material: powder coated steel sheet
Description
Flex-Frame®, for cabinet widths 500/600 mm
The telescopic Flex-Frame® mounting frame enables clean installation of the water supply and drainage in the sink base unit. Commercially available angle valves can be fixed centrally in the clamp device. In addition, surface-mounted sockets are integrated by means of a press fitting and wall washers. In addition, the organiser element for the sink base unit is used in combination with pipe clamps and, if required, with the Naber Water Box as a central water distributor. It is manufactured in solid quality from sheet steel with powder-coated surfaces and is suitable for cabinet widths of 500/600 or 800/900/1000 mm.
Mounting frame sheet steel, white (RAL 9010), telescopic.
— for a clear mounting level in kitchen base units
— installation options for commercially available angle valves (1/2", 3/8") in connection with wall discs/press fittings for surface-mounted sockets, pipe clamps for HT-pipes, Naber Water Box, etc.
— suitable for cabinet widths 500/600 or 800/900/1000 mm (16+19 mm body thickness)
— high-quality appearance due to scratch- and impact-resistant powder coating
— easy to install due to prior fixing of the frame to the required cabinet width
Mounting frame sheet steel, white (RAL 9010), telescopic.
— for a clear mounting level in kitchen base units
— installation options for commercially available angle valves (1/2", 3/8") in connection with wall discs/press fittings for surface-mounted sockets, pipe clamps for HT-pipes, Naber Water Box, etc.
— suitable for cabinet widths 500/600 or 800/900/1000 mm (16+19 mm body thickness)
— high-quality appearance due to scratch- and impact-resistant powder coating
— easy to install due to prior fixing of the frame to the required cabinet width
Article type:
Mounting frames
Cabinet width:
500/600 mm
Colour:
white (RAL 9010)
Discontinued item:
No
Further:
for a clear mounting level in kitchen base units, installation options for commercially available angle valves (1/2", 3/8") in connection with wall discs/press fittings for surface-mounted sockets, pipe clamps for HT-pipes, Naber Water Box, etc.
Height:
156 mm
Length:
500 - 600 mm
Material:
powder coated steel sheet
Mounting/Fixing:
surface mounting
Note:
easy to install due to prior fixing of the frame to the required cabinet width
Properties:
Scratch-resistant, impact-proof
Width:
113 mm
Assembly
Measures
More
MAGAZINE
Little things make big differences
With the MONTEC® range, Naber supplies all the relevant standard components – from the set for the sink connection to the kitchen connection box, which considerably simplifies the electrical installation of multiple large appliances.
Contact persons and kitchen professionals in your area
The nearest Naber dealer is not far away. On this page you will find competent contact persons and kitchen professionals.
There are three print catalogues: BASICS, TECH and INTERIEUR. They are a popular orientation guide and a rich source of information for browsing and looking around. Let yourself be inspired!