Capitello 2, stainless steel, H 170 mm, tube Ø 45 mm
Product number:
3021075
- Console
- round
- slanted
Description
Capitello 2, stainless steel, H 170 mm, tube Ø 45 mm
With its angled arrangement, the Capitello 2 console support creates an eye-catching feature in the kitchen furnishings. It is used to set up a raised counter on the worktop and creates a trendy dining area. Its timeless design as a round tube with a diameter of 45 mm harmonises with almost any furnishing concept. The support leg is equipped with a round mounting plate for attaching a wooden counter top. This corresponds with the likewise round support plate for a harmonious overall look. If a glass table top is to be used, a stainless steel glass adapter plate is required, which is available as an accessory. The support convinces with its stable construction with a high load-bearing capacity of 40 kg when used in pairs and with an even weight distribution. For an individual counter design, the console is available in different heights. In addition, there is a choice of elegant surface finishes. It is mounted on the worktop by means of a robust screw connection with a lock nut.
Console. With bolted connection.
— slanted
— max. load per pair approx. 40 kg given even distribution, max. spacing of the consoles of 900 mm and max. projection of the plates of 250 mm
When using the glass adapter disk (3021056) bonding should be performed by a glazier.
Console. With bolted connection.
— slanted
— max. load per pair approx. 40 kg given even distribution, max. spacing of the consoles of 900 mm and max. projection of the plates of 250 mm
When using the glass adapter disk (3021056) bonding should be performed by a glazier.
Article type:
Console
Carrying capacity:
max. load per pair approx. 40 kg given even distribution, max. spacing of the consoles of 900 mm and max. projection of the plates of 250 mm
Colour:
Stainless steel
Form:
round
Height:
170 mm
Inclination angle:
60°
Length:
90 mm
Note:
When using the glass adapter disk (3021056) bonding should be performed by a glazier., With bolted connection.
Outer diameter:
90 mm
Support element version:
slanted
Tube dimension:
Ø 45 mm
Accessories
1
Variant available
Glass adapter disk, stainless-steel, Ø 90 mm
Subscription
Product number:
3021056
- Accessory
- Material: stainless steel
1
Variant available
Contact persons and kitchen professionals in your area
The nearest Naber dealer is not far away. On this page you will find competent contact persons and kitchen professionals.
There are three print catalogues: BASICS, TECH and INTERIEUR. They are a popular orientation guide and a rich source of information for browsing and looking around. Let yourself be inspired!