Product information:
Corno Piu PFU3, stainless steel
Product number:
1013123
- Built-in sink
- Flush mounted sink
- Sub-structure bowl
Description
Corno Piu PFU3, stainless steel
With its discreet design, the square built-in/undercounter sink Corno Piu PFU3 is ideal for island solutions. Its appearance is convincing thanks to its symmetrical rim geometry and low corner radii. The purist appearance is complemented by the overflow integrated flush with the upper rim. The material used is high-quality stainless steel, which is refined with a fine structure using a wet-grinding process. This results in an insensitive and easy-care surface that also allows water to run off easily. Thanks to the flat rim, the single-bowl sink can be installed surface-mounted or flush, depending on requirements. An undercounter solution with a recessed look is also possible, in which the layered decor of the worktop is visible. The kitchen sink is available individually or as a set with the matching Mio 3 mixer tap. A flush-mounted strainer basket valve and a drain and overflow fitting are offered as an ideal complement to the fittings.
Built-in/sub-structure sink. Single bowl. 3½" drain and spill-over fitting with basket strainer valve flush with the bottom. When using the mounting brackets supplied, the installation width required increases by approx. 30 mm per side in case of the sub-structure sink.
Flat edge: also suitable for flush installation
— suitable for worktop thicknesses from 10–40 mm (built-in sink) and 20 mm (sub-structure sink)
— cut-out dimensions ca. 430 x 430 mm (built-in sink)
— cut-out dimensions ca. 401 x 401 mm (substructure sink)
Built-in/sub-structure sink. Single bowl. 3½" drain and spill-over fitting with basket strainer valve flush with the bottom. When using the mounting brackets supplied, the installation width required increases by approx. 30 mm per side in case of the sub-structure sink.
Flat edge: also suitable for flush installation
— suitable for worktop thicknesses from 10–40 mm (built-in sink) and 20 mm (sub-structure sink)
— cut-out dimensions ca. 430 x 430 mm (built-in sink)
— cut-out dimensions ca. 401 x 401 mm (substructure sink)
Article type:
Sink
Cabinet width:
500 mm
Colour:
Stainless steel
Cut-out dimension:
approx. 401 x 401 mm (substructure sink), approx. 430 x 430 mm (built-in sink)
Depth:
440 mm
Depth main pool:
400 mm
Discontinued item:
No
Excenter fitting:
Drain and spill-over fitting
Flushing radius (R):
10
Height:
327 mm
Height main pool:
201 mm
Installation variant:
Built-in sink, Flush mounted sink, Sub-structure bowl
Main pool width:
400 mm
Material:
stainless steel
Material thickness worktop minimum:
10 mm
Maximum worktop material thickness:
40 mm
Note:
when using the mounting brackets supplied, the installation width required increases by approx. 30 mm per side in case of the sub-structure sink
Number of basins:
1 main sink
Overflow:
Overflow in the main basin
Pelvic inner radius (R):
12
Sound insulation:
Yes
Valve type:
3 1⁄2" flush bottom strainer basket valve
Width:
440 mm
Worktop thickness:
The sinks are suitable for worktop thicknesses from 10–40 mm (built-in sink) and from 20 mm (sub-structure sink)
Armature bench:
No
Downloads
Assembly
2D drawings
Accessories
Drip tray large, stainless steel
Subscription
Product number:
1013044
- Accessory
- Width: 366 mm
- Depth: 433 mm
Drip tray small, stainless steel
Subscription
Product number:
1013043
- Accessory
- Width: 196 mm
- Depth: 433 mm
Rotational knob excenter fitting, for Corno Piu PFU 2–11
Subscription
Product number:
1014046
- Accessory
- Material: stainless steel
- Colour: Stainless steel
Filo dish drainer, stainless steel
Subscription
Product number:
1013041
- Accessory
- Width: 325 mm
- Depth: 450 mm
Recommendations
1
Variant available
Stainless steel care agent Edelglanz, 250 ml
Subscription
Product number:
1111143
- Cleaning agent
- 0,25 l
4
variations available
LINEA Mio 3, chrome, high-pressure
Subscription
Product number:
5011308
- Sink faucet
- Single lever faucet
- Swivelling
1
Variant available
Stainless steel cleaning agent Utral, 250 ml
Subscription
Product number:
1111142
- Cleaning agent
- 0,25 l
MAGAZINE
NABER-CONTURA® - Beautiful sinks with convincing functionality!
Our sinks create the highlight in every kitchen. Perfectly designed and functional. To ensure optimal work, every day.
Contact persons and kitchen professionals in your area
The nearest Naber dealer is not far away. On this page you will find competent contact persons and kitchen professionals.
There are three print catalogues: BASICS, TECH and INTERIEUR. They are a popular orientation guide and a rich source of information for browsing and looking around. Let yourself be inspired!