WESCO® Table support TG80, stainless steel-coloured brushed, W 710, D 710 mm
Product number:
3032023
- Table frame
- Table frame
- Carrying capacity: 120 kg
Description
WESCO® Table support TG80, stainless steel-coloured brushed, W 710, D 710 mm
A dining table according to individual ideas can be realised with the TG80 table frame. Its linear and elegant design creates a modern atmosphere in the kitchen or dining room. It is constructed as a four-legged frame with block legs that are 80 x 80 mm thick. The connecting elements are upright crossbars with a cross-section of 60 x 30 mm. This results in a stable base with a high load-bearing capacity of up to 120 kg. The frame can be combined with any table top made of wood or glass. When using a kitchen worktop, the corresponding pre-drilled holes can be used. The table base is made of high-quality aluminium profiles. You can choose between trendy surface finishes and different dimensions. The disassembled metal frame is assembled with a stable screw connection. A glass adapter plate set and an aluminium height adjuster are available as accessories.
— feet 80 x 80 mm
— cross bar 60 x 30 mm upright
— height without worktop 720 mm
— plastic glides
— pre-drilled for worktop
— assembly required, max. load bearing capacity 120 kg
— from a height of 850 mm only available as high table frame
— max. 850 x 2400 x 1200 mm (H x W x D)
For special sizes prices on request (3504999).
— feet 80 x 80 mm
— cross bar 60 x 30 mm upright
— height without worktop 720 mm
— plastic glides
— pre-drilled for worktop
— assembly required, max. load bearing capacity 120 kg
— from a height of 850 mm only available as high table frame
— max. 850 x 2400 x 1200 mm (H x W x D)
For special sizes prices on request (3504999).
Article type:
Table frame
Brand:
WESCO®
Carrying capacity:
120 kg
Colour:
stainless steel-coloured brushed
Depth:
710 mm
Dimensions profile crossbar:
cross bar 60 x 30 upright
Dimensions profile foot/floor plate:
80 x 80 mm
Form:
square
Frame type:
Table frame
Furniture glides:
plastic glides
Height:
720 mm
Height without APL:
720 mm
Material:
aluminium
Material floor glides:
plastic
Max. Dimensions for table top:
2400 x 1200 mm
Mounting/Fixing:
pre-drilled for worktop
Note:
assembly required
Preparation for:
APL plate
Suitable for:
freestanding tables
Surface/coating:
brushed
Width:
710 mm
Downloads
Assembly
Accessories
2
variations available
Height adjuster 80, with stainless steel cap
Subscription
Product number:
3032139
- Accessory
- for table frame with 80 x 80 mm
- round
2
variations available
Height adjuster 80, plastic
Subscription
Product number:
3032168
- Accessory
- for table frame with 80 x 80 mm
- round
Contact persons and kitchen professionals in your area
The nearest Naber dealer is not far away. On this page you will find competent contact persons and kitchen professionals.
There are three print catalogues: BASICS, TECH and INTERIEUR. They are a popular orientation guide and a rich source of information for browsing and looking around. Let yourself be inspired!