Sink duct, Ø 12 mm, chrome

Product number: 5031014

Connecting materials
¾" screw cap with gasket and hose thread ½" x 12 mm

Prices will only be shown once logged in.

Description

The flush connector is suitable for a reliable connection between the water supply pipe and the sink and mixer taps. It is equipped with a flexible hose connection. As the connection has an adjustment range of 70 mm, it can also be used with particularly thick worktops or thick-walled sink fittings. The diameter is 12 mm.

For reliable sealed connection of water supply pipe and sink/mixer fitting. An adjusting range of 70 mm enables the use of even very thick worktops or thick-walled moulded sink parts. With flexible hose connection on the valve side.
Copper pipe Ø: 12 x 500 mm and ¾" screw cap with gasket and hose thread ½" x 12 mm.

Article type:

Connecting materials

Adjustment:

An adjusting range of 70 mm enables the use of even very thick worktops or thick-walled moulded sink parts

Colour:

chrome

Diameter:

12 mm

Further:

with flexible hose connection on the valve side

Screw connection:

¾" screw cap with gasket and hose thread ½" x 12 mm

Suitable for:

for reliable sealed connection of water supply pipe and sink/mixer fitting

With union nut:

Yes

Downloads

Data sheet

MAGAZINE

Little things make big differences

With the MONTEC^® range, Naber supplies all the relevant standard components – from the set for the sink connection to the kitchen connection box, which considerably simplifies the electrical installation of multiple large appliances.

To the magazine

Contact persons and kitchen professionals in your area

The nearest Naber dealer is not far away. On this page you will find competent contact persons and kitchen professionals.

CATALOGUES & BROCHURES

There are three print catalogues: BASICS, TECH and INTERIEUR. They are a popular orientation guide and a rich source of information for browsing and looking around. Let yourself be inspired!

Catalogue PDFs Online catalogue