More:
Energy box, 5 m/2 m (supply line) cable length
- Distributor
- angular
Prices will only be shown once logged in.
Technical specifications:
— input voltage 400 V
— output voltage 4- pin (2-phase) 400 V
— output voltage 3- pin (1-phase) 230 V
— current max. 20 A
— tested according to IEC 60670-1 (DIN EN 60670-1), IEC 60670-22 (DIN EN 60670-22) and IEC 61535 (DIN EN 61535)
— material: self-extinguishing according to UL 94 (FR). In case of fire, after removal of the ignition source, this plastic will stop burning within a short time (self-extinguishing)
— construction: the housing is screwed and must not be opened by unauthorised persons
— dimensions of the box: 102 x 105 x 27 mm (H x W x L)
— protection type for the entire product IP20
— material: plastic
Calculation of the power requirement of the energy box:
— total power requirement of the cooker socket: 11 KW (with symmetrical distribution)
— hob power (4-pin connection): max. 7360 W (2-phase)
— oven power (3-pin connection): max. 3680 W (1-phase)
The use of a table socket to connect multiple consumers via a box coupling is not allowed for safety reasons.
If the induction hob already has a fixed cable, its use is compulsory. In this case, disconnect the 4-pin connector from the preassembled cable of the energy box and attach to the existing cable of the induction hob.
Downloads
Assembly
Data sheet
Measures
More
MAGAZINE
Little things make big differences
With the MONTEC® range, Naber supplies all the relevant standard components – from the set for the sink connection to the kitchen connection box, which considerably simplifies the electrical installation of multiple large appliances.
Contact persons and kitchen professionals in your area
The nearest Naber dealer is not far away. On this page you will find competent contact persons and kitchen professionals.
There are three print catalogues: BASICS, TECH and INTERIEUR. They are a popular orientation guide and a rich source of information for browsing and looking around. Let yourself be inspired!