PRIME flow Base ventilation grid 1, W 84 mm, L 480 mm, silver
- Ventilation grid
- surface mounting
Prices will only be shown once logged in.
The COMPAIR® Plinth Ventilation Grille 1 is made of aluminium and is of a high quality. It serves as a return air opening when a recirculation unit is installed in the plinth. The number of grilles required depends on the cross-sectional area for air passage specified by the hood manufacturer. The ventilation cross-section per louvre grille is approximately 265 cm². Installation is carried out by screwing the grille into place directly in front of the plinth cut-out.
Slatted ventilation grid in aluminium. Can be used as a return flow opening in case of circulating air units positioned in the base. The necessary cross-section area for the passage of air specified by the hood manufacturer is to be observed! This results in the number of grids required. Installation is carried out by screwing in front of the base cut-out.
— ventilation diameter ca. 265 cm²
Downloads
Data sheet
MAGAZINE
It couldn't be better: COMPAIR PRIME flow®!
Our latest air duct system revolutionises kitchen ventilation: Maximally innovative. Maximum efficiency. Maximum airtightness. And the installation is simply ingenious.
COMPAIR® Ventilation technology
All about kitchen ventilation technology!
Experience, innovation and worldwide service characterise our products. Come with us into the world of good kitchen ventilation.
Contact persons and kitchen professionals in your area
The nearest Naber dealer is not far away. On this page you will find competent contact persons and kitchen professionals.
There are three print catalogues: BASICS, TECH and INTERIEUR. They are a popular orientation guide and a rich source of information for browsing and looking around. Let yourself be inspired!